Use Case #2: To save battery backup time, you want to stop all your computers after a predefined
time.
On the NMC, configure a Shutdown Criteria.
e.g. H910P NMC shutdown configurations are available from UPS‐> Shutdown Configuration
Note: In this case the computer automatic restart is guaranteed.
Use Case #3: You want to perform load shedding on the specific computer hosting Dell ULNM#2 (i.e.
stop the computer hosting Dell ULNM#2 after a predefined time)
On Dell ULNM#2, configure a Shutdown timer value (this configuration parameter is available
from Settings
Shutdown
Note: In this case the automatic restart for the computer hosting Dell ULNM#2 is not
guaranteed
Note: Use Case 3 can be combined with Use Case 1 or Use Case 2.
3.1.4.3.
ARCHITECTURE #3 (NETWORK ATTACHED UPS THROUGH SHUTDOWN
CONTROLLER)
Use Case #1: You want to keep all your computers alive as long as possible.
This is the default shutdown configuration for the Shutdown Controller DELL ULNM#1 and
other Dell ULNMs.
Dell ULNM default configuration is available from Settings
Configuration.
Use Case #2: To save battery backup time, you want to stop all your computers after a predefined
time.
On Dell ULNM#1 (Shutdown Controller) configure a Shutdown timer value. (this
configuration parameter is available from Settings
Configuration)
Note: In this case the automatic restart for all the computers is guaranteed
Use Case #3: You want to perform load shedding on the specific computer hosting Dell ULNM#2
(stop the computer hosting Dell ULNM#2 after a predefined time).
On Dell ULNM#2, configure a Shutdown timer value (this configuration parameter is
available from Settings
DELL ULNM – User Guide
P‐164000120 Rev 0.04
Edit Shutdown Configuration)
Shutdown
Edit Shutdown Configuration)
Dell UPS Local Node Manager
Shutdown
Edit Shutdown
Shutdown
Edit Shutdown
USER GUIDE
Dell.com
26