Operations In History Window - HP StorageWorks P9000 - Disk Arrays User Manual

Item
Previous/Next
History
Related Topics
"Export operations history " (page 187)
Information about field behavior is shown in
Descriptions of the pair operations seen in the window are provided in
window " (page

Operations in History window

Copy operations have a beginning and end. These parts of the overall operations are detailed in
the History window, and described here.
Operation Displayed
Pair definition
Paircreate Start
Paircreate Complete
Pairresync Start
Pairresync Complete
Pairsplit-r Start
Pairsplit-r Complete
Pairsplit-r(Failure)
Pairsplit-S Start
Pairsplit-S Complete
Status Change by MCU(SMPL to COPY)
Status Change by MCU(SMPL to PAIR)
Description
Shows a maximum of 16,384 operations at a time. If the number of operations exceeds 16,384,
click Previous or Next to show the remaining operations.
The history of operations on pairs in the connected storage system. The list consists of the
following columns:
Operation Time: Date and time operation completed.
Operation: Available operations (described in
Journal: Journal number.
Mirror ID: Mirror ID.
VOL: The volume manipulated during the operation. This volume is located in the local storage
system. This number indicates LDKC:CU:LDEV (the LDKC number, the CU number, and the
LDEV number). A volume ending in # (e.g., 00:00:3C #) indicates the LDEV is an external
volume. For details, see HP StorageWorks P9000 External Storage for Open and Mainframe
Systems User Guide. A volume ending in X (e.g., 00:00:3C X) indicates the LDEV is a Thin
Provisioning virtual volume. For details on a virtual volume, see HP StorageWorks P9000
Provisioning for Open Systems User Guide.
Paired VOL: The volume paired with the manipulated volume. This volume is located in the
remote storage system. This number indicates LDKC:CU:LDEV (the LDKC number, the CU
number, and the LDEV number).
Copy Time: The time taken for the operation (from the start of the operation to the end).
Displayed only for Paircreate Complete and Pairresync Complete operations.
185).
"Operations in History window " (page
"History window notes" (page
Description
A pair was defined.
Creation of the pair was started.
Creation of the pair was finished.
Restoring of the pair was started.
Restoring of the pair was finished.
Splitting (Suspending) of the pair was started.
Splitting (Suspending) of the pair was finished.
The pair was split (suspended) because of a failure.
Release of the pair was started.
Release of the pair was finished.
The status of the pair was changed from SMPL to COPY
because of an operation from the primary storage system.
The status of the pair was changed from SMPL to PAIR
because of an operation from the primary storage system.
185)).
187).
"Operations in History
History window 185