Download Print this page

HP StorageWorks P9000 - Disk Arrays User Manual: Saving Pair Status Information Into A Text File

Hp storageworks p9000 continuous access journal user guide (av400-96349, january 2011).
Hide thumbs

Advertisement

Set: Applies the settings in the Display Filter dialog box to the list.
Cancel: Discards the settings and closes the dialog box.

Saving pair status information into a text file

You can use the export function only while the client file access is enabled. When the client file
access is not enabled, the Export is not available on the Pair Operation window. For the further
information of the client file access settings, see HP StorageWorks P9000 Remote Web Console
User Guide. Following information of pair is described in the exported file:
Item
Port
Gr(Name)
LUN
Vol
Status
JNL
Mr
S/N(LDKC)
CNTL
Port
Gr
LUN
Vol
JNL
Type
CTG
ErrLv
Sync
CLPR
CopyTime
An LDEV number ending with # indicates the volume is an external volume. For detailed information
about external volumes, see HP StorageWorks P9000 External Storage for Open and Mainframe
Systems User Guide.
A device ID ending in X (e.g., 00:00:3C X) indicates the LDEV is a Thin Provisioning virtual volume.
For details on a virtual volume, see HP StorageWorks P9000 Provisioning for Open Systems User
Guide.
"00" appears as the LDCK number when the volume is a volume of XP12000 Disk Array/XP10000
Disk Array and XP24000/XP20000 Disk Array.
To save information about pairs in a text file
1.
If necessary, filter information in the list in the Pair Operation window.
74
Monitoring the system
Description
Port in the local storage system.
Group number and name of host group in the local storage system. (The name is limited to a
maximum of 16 characters.)
LU number in the local storage system.
LDKC number, CU number and LDEV number in the local storage system.
Status of the pair.
Journal number in the local storage system.
Mirror ID.
Serial number of the remote storage system.
Controller ID and model name of the remote storage system.
Port number in the remote storage system.
Group number of host group in the remote storage system.
LU number in the remote storage system.
LDKC number, CU number and LDEV number in the remote storage system.
Journal number in the remote storage system.
Type of volumes in the local storage system.
Consistency group number of RAID Manager.
Error level.
Progress of copy operation. Or, synchronization rate (that is, concordance rate) between the
data volume before the pair was split and the data volume after the pair was split.
CLPR number and CLPR name.
Copy time

Advertisement

Troubleshooting

   Also See for HP StorageWorks P9000 - Disk Arrays

HP P9000 Manual
HP P9000 Manual 333 pages

   Related Manuals for HP StorageWorks P9000 - Disk Arrays

Comments to this Manuals

Symbols: 0
Latest comments: