HP StorageWorks P9000 - Disk Arrays User Manual page 112

Hp storageworks p9000 continuous access journal user guide (av400-96349, january 2011)
Hide thumbs Also See for StorageWorks P9000 - Disk Arrays:
Table of Contents

Advertisement

Table 19 RAID Manager error codes for Continuous Access Journal (continued)
Error code (SSB1)
1 12
Troubleshooting
Error code (SSB2)
Error content
8F1 1
The Cnt Ac-J pair cannot be created. The processing of volume migration
could not be stopped because the P-VOL was being migrated by Auto LUN.
8F14
The Cnt Ac-J pair cannot be created because the specified volume was the
reserved volume.
8F17
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was in the state of online from the host.
8F18
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was used in a pair on another program product.
8F19
A request of Cnt Ac-J Paircreate was rejected because the emulation type
of the specified volume was unusable.
8F1B
A request of Cnt Ac-J Paircreate was rejected because the specified P-VOL
was not in the SMPL status.
8F1C
A request of Cnt Ac-J Pairresync was rejected because the specified P-VOL
was not in the PSUS status.
8F21
A request of Cnt Ac-J Paircreate or Pairresync was rejected because of the
one of following reasons.
The specified volume was the P-VOL of the Continuous Access
Synchronous.
The unavailable configuration with the combination of the Business Copy
(including when the mirror ID of the Cnt Ac-J was 0).
Unavailable configuration of the status transition.
8F24
A request of Cnt Ac-J Paircreate was rejected because a path between the
devices was not created.
8F25
A request of Cnt Ac-J Paircreate or Pairresync was rejected because PIN
was existed in the specified volume.
8F28
A request of Cnt Ac-J Paircreate or Pairresync was rejected because it could
not access to the specified P-VOL or S-VOL.
8F29
A request of Cnt Ac-J Paircreate was rejected because the specified master
journal was unusable.
8F2A
The Cnt Ac-J pair cannot be created because the specified P-VOL is a Flash
Copy S-VOL.
8F2B
A request of Cnt Ac-J Paircreate was rejected because the protect attribute
of the Data Retention was set for the specified P-VOL.
8F33
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was used in a pair on the Continuous Access Synchronous or the Business
Copy.
8F35
A request of Cnt Ac-J Paircreate was rejected because the specified volume
was blocked.

Advertisement

Table of Contents
loading

Table of Contents