HP StorageWorks P9000 - Disk Arrays User Manual page 62

Table 27 Field descriptions for CQUERY TSO and QUERY ICKDSF command output (continued)
Field
PRIMARY-CCA
PRIMARY-LSS
PRIMARY-SERIAL
SECONDARY-SSID
SECONDARY-CCA
SECONDARY-LSS
SECONDARY-SERIAL
PATHS
SAID DEST STATUS
DESCRIPTION
PERCENT OF COPY
COMPLETE
SUBSYSTEM
WWN
LIC LEVEL
* When the MCU-RCU path for Continuous Access Synchronous Z is created on the CU where a Business Copy Z pair
exists, MCU-RCU path information displays.
62 Pair operations using PPRC
Description
S-VOL LDEV number
S-VOL CU number
S-VOL serial number
SSID of the T-VOL CU
T-VOL LDEV number
T-VOL CU number
T-VOL serial number. If you RUN the CQUERY TSO command for the T-VOL, the following
information is also displayed:
00ab000nnnnn
where "a" indicates that the pair is defined as a consistency group and "b" indicates
the pair was split using At-Time Split. "0" indicates otherwise. "nnnnn" is the T-VOL serial
number.
Invalid for Business Copy; "1" displays.
Invalid for Business Copy; "FFFF FFFF" displays.
Invalid for Business Copy; "PATH ESTABLISH" displays.
Invalid for Business Copy; "100%" displays.
Invalid for Business Copy, not valid content.
Invalid for Business Copy, not valid content.
Invalid for Business Copy, not valid content.