A Pair Operations Using Pprc; Overview Of Pprc Commands Supported By Business Copy Z - HP StorageWorks P9000 - Disk Arrays User Manual

A Pair operations using PPRC

You can perform Business Copy Z pair operations using TSO PPRC and ICKDSF PPRCOPY
commands. This appendix provides PPRC requirements, commands, and examples.
It is assumed that you have PPRC command experience. All the instructions for using the PPRC TSO
and ICKDSF commands are not provided here. See the IBM user documentation for more
information.

Overview of PPRC commands supported by Business Copy Z

Except some operations, Business Copy Z pair operations can be performed using PPRC. With
PPRC, you can:
Add pairs.
Add and split pairs.
Split pairs, specifying steady split or quick split.
Resynchronize pairs, normal and reverse, quick resync/quick restore operations.
Delete pairs.
Display pair status and other information.
The following table shows the PPRC commands supported by Business Copy Z.
Table 14 Supported TSO and ICKDSF commands
TSO command
CESTPAIR
CESTPAIR
CSUSPEND
CSUSPEND
CESTPAIR
CESTPAIR
CESTPAIR
CESTPAIR
CDELPAIR
CQUERY
Operations that can be performed with Remote Web Console but not PPRC include:
Set or reset the S-VOL reserve attribute.
Suspend pairs.
50 Pair operations using PPRC
ICKDSF
PPRCOPY ESTPAIR
PPRCOPY ESTPAIR
PPRCOPY SUSPEND
PPRCOPY SUSPEND
PPRCOPY ESTPAIR
PPRCOPY ESTPAIR
PPRCOPY ESTPAIR
PPRCOPY ESTPAIR
PPRCOPY DELPAIR
PPRCOPY QUERY
Description
Adds a pair, starts initial copy operation, and changes
status to duplex.
Adds and simultaneously splits a pair.
Splits a pair, starts quick split operation.
Splits a pair, starts steady split operation.
Resynchronizes a pair, starts normal resync.
Resynchronizes a pair, starts quick resync.
Resynchronizes a pair, starts reverse copy.
Resynchronizes a pair, starts quick restore.
Deletes a pair, changes status to simplex.
Displays detailed pair status information.