Pprcopy Query; Output Descriptions - HP StorageWorks P9000 - Disk Arrays User Manual

PPRCOPY QUERY

The following table shows the PPRCOPY QUERY command parameters used to display pair
information.
Table 26 PPRCOPY QUERY parameters
Parameters
DDNAME,
SYSNAME, or
UNITADDRESS
QUERY example

Output descriptions

The following table shows the field descriptions of the output resulting when CQUERY TSO and
QUERY ICKDSF commands are run.
Table 27 Field descriptions for CQUERY TSO and QUERY ICKDSF command output
Field
DEVICE
LEVEL
STATE
PATH STATUS
CRIT
CGRPLB
PRIMARY-SSID
Value
DDNAME = dname = JCL statement identifying
the volume.
SYSNAME = sysxxx = SYSNAME in the ASSGN
system control statement.
UNITADDRESS = ccuu = device number.
Description
Device number of the volume on which the CQUERY command is issued.
PRIMARY indicates that the volume is an S-VOL. SECONDARY indicates that the volume
is a T-VOL.
Pair status
Invalid for Business Copy; "Active" displays.
Invalid for Business Copy; "NO" displays.
Invalid for Business Copy; "NO" displays.
SSID of the S-VOL CU
Displaying pair information with CQUERY TSO, QUERY ICKDSF
Description
Only one of the three parameters should be
specified. The italic term is the arbitrary name.
For example, dname is the arbitrary unique
name of the JCL statement which identifies the
volume.
61