Displaying Alarms - CLIMAVENETA WWR MTD - MTD/s, BWR MTD - MTD/s Installation And User Manual

DISPLAYING ALARMS

The alarm signals are displayed flashing. The following procedure describes how to mute an alarm.
The various errors will be displayed in directory AL (see Status menu)
46
WWR MTD - BWR MTD GB 03/2010
From the main display, press the set button
The display will show label Ai. Scroll the other labels using
the UP and DOWN buttons until reaching label AL.
Press the set button to display the label for the first active
alarm (if this exists).
In this case, the first alarm is Er01. Scroll any other active
alarms using the UP and DOWN buttons.
NOTE: the menu is not cyclical.
For example, if alarms Er01 Er02 and Er03 are active, the
display will be::
Er01 ->Er02->Er03 <-Er02<-Er01
NOTE: -> UP, <-DOWN
To exit the menu, press esc until returning to the main dis-
play.