Displaying Authorised Technician Parameters - CLIMAVENETA WWR MTD - MTD/s, BWR MTD - MTD/s Installation And User Manual

DISPLAYING AUTHORISED TECHNICIAN PARAMETERS

Accessing the PASS directory (from the main display, pressing the esc and set buttons together [esc+set] and scrolling to the
directory with up / down) and setting the PASS accesses the parameters visible for the password entered.
To access the PASS directory from the main display, press
esc and set together [esc+set].
Pressing the two buttons accesses the menu listing the
directories.
Scroll using the up and down buttons to the PASS directory.
To enter the PASS directory press the set button.
Then enter the password (installer or manufacturer), press
set and exit.
Access the parameters to display or change the values.
Press the up and down buttons to select the Par submenu.
Press the set button to display the desired directory.
The first directory displayed by the instrument will be the CF
directory (configuration).
To set the individual CF parameters, simply press set again.
The instrument will display parameter CF00 (default factory
settings).
To scroll the various parameters, simply press the up button
to go to the next parameter (in this case CF01) or the down
button to go to the previous parameter (in this case CF47).
CF00->CF01->CF02->...->CF47->CF00
CF47<-CF00<-CF01->...<-CF46<-CF47
NOTE: -> UP, <-DOWN
To display the value of the parameter (in this case CF00),
press the set button.
GB 03/2010 WWR MTD - BWR MTD
43