Setting The Set Points - CLIMAVENETA WWR MTD - MTD/s, BWR MTD - MTD/s Installation And User Manual

SETTING THE SET POINTS

As an example, the Set Point in COOL mode will be changed from 12.0 degrees centigrade to 12.5 degrees centigrade.
40
WWR MTD - BWR MTD GB 03/2010
To change the set point, starting from the main display,
press the set button.
Pressing the set button once displays the various directo-
ries.
Scroll the menu using the up and down buttons until reach-
ing the SP directory.
To enter the SP directory press the set button.
The first mode displayed will be COOL, then scrolling with
up and down to HEAT and AS modes (as shown on the
side).
Taking the example of changing the set point for COOL
mode.
Select COOL from the menu and press the set button.