Basic Photography And Playback: I_1 (Auto) Mode; Step 1 Turn The Camera On And Select I_1 (Auto) Mode - Nikon COOLPIX P100 User Manual

F,"
o
o
,<
o_
n
c
o
rD
This section describes how to take pictures in I_1 (auto) mode, an automatic, "point
and shoot" mode recommended for first time users of digital cameras.
1 Remove the lens cap and press the power
switch.
• The power will be turned on, and the lens will extend.
• The power-on ]amp (green) will light for a moment and
the monitor will turn on.
2 Rotate the mode dial
to IPI.
3 Check the battery level and number of Battery level indicator
exposures remaining in the monitor.
Battery Level
Monitor Description
NO
INDICATOR Battery fully charged.
Battery levd low; prepare to charge or
replace the battery.
Cannot shoot. Recharge or replace with
Battery
exhausted, a fully charged battery.
N umber of exposures
remaining
Number of Exposures Remaining
The number of exposures remaining will be displayed.
The number of pictures that can be stored depends on the remaining capacity of the
internal memory or memory card, the image quality, and the image size ([]]_77).
26