Set Terminal Options; Table 3.10: Networking Configuration Settings; Figure 3.16: Ipump 562 Osd Lan Ip Setup - Wegener iPUMP 562 User Manual

Use the LAN IP Setup screen to set and display the networking configuration.
LAN Configuration
LAN IP Address
LAN Netmask
LAN Gateway

Set Terminal options

Use following steps to display Terminal Setup screen on the OSD menu:
1. Navigate to the Unit Setup screen, see Unit Setup screen on page 23.
2. Press the down arrow button to select Terminal Setup .
3. View the details as shown in Figure 3.17 .
www.wegener.com

Figure 3.16: iPump 562 OSD LAN IP Setup

Table 3.10: Networking Configuration Settings

Option Possible values
Static or DHCP
-
-
-
800092-01 Rev. A
Unity 552 User's Manual
Comments
IP Address
IP Net-mask
IP Gateway Address
27