Convection Cooking - Jenn-Air JGR8895BDS Installation & Use Manual

FOOD
Chicken
bone-in pieces
well-done
Fish*
Filets
Steaks, 1" (2.5 cm) thick
*When broiling fish, spray pan insert with cooking oil. Do not turn
fish filets.

Convection Cooking

(on some models)
During convection cooking, the fan provides increased hot air
circulation continuously and more consistently throughout the
oven. The movement of heated air around the food helps to
speed up cooking by penetrating the cooler outer surfaces. Food
cooks more evenly, browning and crisping outer surfaces while
sealing moisture inside.
During the Convect function, the ring element operates, along
with the fan, to provide an indirect source of heat in the oven
cavity. If the oven door is opened during convection cooking or
preheating, the element(s) and fan will turn off immediately. Once
the door is closed, they will come back on.
It is important not to cover foods so that surface areas remain
exposed to the circulating air, allowing browning and crisping.
Keep heat loss to a minimum by only opening the oven door
when necessary.
Choose cookie sheets without sides and roasting pans with
lower sides to allow air to move freely around the food.
Test baked goods for doneness a few minutes before the
minimum cooking time with a method such as a toothpick.
Use a meat thermometer to determine the doneness of meats
and poultry. Check the temperature of pork and poultry in 2 or
3 different places.
Before convection cooking, position the rack(s) according to
the "Positioning Racks and Bakeware" section.
When using more than one rack, position bakeware/
cookware on the racks to allow movement of the fan
circulated air around the food. See the "Positioning Racks
and Bakeware" section.
If the oven is full, extra cooking time may be needed.
For optimal cooking results, do not cover food.
When roasting poultry and meat, use a broiler pan and grid. It
is not necessary to wait for the oven to preheat, unless
recommended in the recipe.
A. Broiler grid
B. Broiler pan
14
RACK APPROX. TIME
POSITION (minutes)
LO Broil
oven bottom 25-35
LO Broil
oven bottom 8-11
oven bottom 10-15
A
B
Preheating
During the CONVECT preheating cycle, the fan, and the bake and
broil elements heat the oven cavity. When preheating is finished,
the ring element cycles to maintain the oven temperature while
the fan continues to constantly circulate the heated air.
Convection Baking (lower oven only)
Use Convect for single or multiple rack baking. When convection
baking, enter your normal baking temperature. The control will
automatically reduce the set oven temperature by 25°F (15°C)
(even though normal baking temperature is displayed).
To Set Convect Bake:
1. Press CONVECT BAKE.
"LOWER," "BAKE," and the Fan icon will flash. "000" will
flash in the display.
2. Select the oven temperature.
Press AUTOSET for 350°F (175°C) or the appropriate number
pads. Each additional press of the Autoset pad will increase
the temperature by 25°F (15°C).
The oven temperature can be set between 170°F and 550°F
(75°C and 288°C).
3. Press CONVECT BAKE again or wait 4 seconds.
"LOWER" and "BAKE" will stop flashing. "PREHEAT" and
"LOWER" will appear in the display.
"100°" (35°C) or the actual oven temperature if over
100°F (35°C) will display. The temperature will rise in
5° increments until the preset temperature is reached.
The Fan icon will start to rotate.
Allow the oven to preheat for 7 to 12 minutes.
When the set oven temperature is reached, one long beep will
sound. "PREHEAT" will disappear from the display and the
set temperature will display.
To recall the set temperature during preheat, press CONVECT
BAKE.
4. Place food in the oven.
5. Press Lower Oven CANCEL or LOWER STOP when finished.
6. Remove food from the oven.
Convection Roasting (lower oven only)
When convection roasting, enter your normal roasting time and
temperature. The control will automatically prompt you to check
the food for doneness at 75% of the set time. The convection fan
will come on immediately after the oven has turned on.
NOTE: When convection roasting, the cooking time must be set
before setting the temperature.
To Set Convect Roast:
1. Press CONVECT ROAST.
"LOWER," "ROAST," and the Fan icon will flash. "000" will
flash in the display.
2. Enter the roasting time using the number pads. Time can be
set from 10 minutes (00:10) to 11 hours, 59 minutes (11:59).
If preheating is required, add 15 minutes to the programmed
cooking time.
3. Press CONVECT ROAST again or wait 4 seconds.
"LOWER," "ROAST," and the fan icon will flash in the display.
"000" will flash in the display.