Initialization - Epson GT-12000 User Manual

Initialization

By observing the scanner's initialization, you can make sure
that the scanner is operating properly before you connect it to
your computer.
1. Open the document cover so you can see the operation of
the scanner during initialization.
2. Turn on the scanner by pressing the OPERATE button.
While the scanner initializes, the fluorescent lamps on the
carriage flash. If the carriage is not at the home position (the
left of the scanner), it moves to the home position.
When the scanner has completed its initialization, the READY
light comes on. If the scanner does not work as described, turn
it off. Make sure that the power cord is firmly plugged in and
that you have released the transportation lock screw, then turn it
on again.
1-5
Setting Up the Scanner