Important Safety Instructions - Epson GT-12000 User Manual

The blue wire must be connected to the terminal in the plug
marked with the letter N.
The brown wire must be connected to the terminal in the plug
marked with the letter L.
If damage occurs to the plug, replace the cord set or consult a
qualified electrician.
Replace fuses only with a fuse of the correct size and rating.

Important Safety Instructions

Read all of these instructions and save them for later reference.
Follow all warnings and instructions marked on the scanner.
Unplug the scanner before cleaning. Clean with a damp
cloth only. Do not spill liquid on the scanner.
Do not place the scanner on an unstable surface or near a
radiator or heat source.
Do not block or cover the openings in the scanner's cabinet.
Do not insert objects through the slots.
Use only the type of power source indicated on the
scanner's label.
Connect all equipment to properly grounded power
outlets. Avoid using outlets on the same circuit as
photocopiers or air control systems that regularly switch
on and off.
Do not let the power cord become damaged or frayed.
5
Introduction