Assigning Start Button Settings Or Scan Jobs - Mac - Epson DS-575W II User Manual

8. Select the job that you want to assign to the
Note: The number of pull-down menus available may vary, depending on your product and any
connected options.
9. Click OK, then click Back.
You can now use the added scan jobs when you scan from the
Parent topic:

Assigning Start Button Settings or Scan Jobs - Mac

You can view or change the default scan settings when you scan using the
scanner. You do this by accessing the scan jobs in the Document Capture program.
Note: Document Capture (Mac) does not support scanning from the
a wireless network (DS-575W II). Launch Epson Scan 2 before scanning from the
scanner.
1. Start Document Capture on a computer connected to the product.
2. Click the
You see a window showing the current scan job list.
3. If you want to add a scan job, click Add or the + icon, enter a name for the new job, select settings
as necessary, and click OK.
You can now use the new scan job when you scan with Document Capture.
Note: See the Help information in Document Capture for details.
4. If you want to assign a scan job to the
window and click Event Settings.
Starting a Scan from a Scanner Button
Manage Job icon from the toolbar at the top of the window.
start button using any of the pull-down menus.
start button on your product.
start button on your scanner over
start button, click the
63
start button on your
start button on your
icon at the bottom of the