Connecting The Scanner To Your Computer - Epson ES-300C User Manual

Connecting the Scanner to Your Computer

After testing the scanner, you are ready to connect it to your
computer.
If you plan to use the ES-300C with an IBM compatible computer,
you must install the bidirectional parallel interface board in your
computer. You then connect the scanner to the computer using the
bidirectional parallel interface. See Appendix B for details on how to
do this.
If you plan to use the ES-300C with a Macintosh computer, you
connect them using the SCSI interface. See Appendix C for complete
details on how to install the SCSI interface board in your scanner
and how to connect the scanner to the computer.
1-13
Setting Up the Scanner