Tips For Direct Printing; Terminating A Direct Print Operation; Zoom And Printable Size - Epson ES-300C User Manual

Tips for Direct Printing

This section provides information that may help you in using the
direct print function.

Terminating a Direct Print Operation

Direct printing does not stop until
scanned or the scanner is turned off. When the printer is set off line
or out of paper, the scanner stops sending data. To resume
runs
printing, set the printer on line or load more paper.
To terminate direct printing in the middle of
the printer off line to
Remove the paper from the printer by pressing the
button; then turn off the printer. (Do not use the platen
LOAD/EJECT
knob.)
If you off the scanner before turning off the printer, the printer
turn
may be unable to go off line. In
or turn the printer off and then back
paper from
the
If you turn the printer off and back on again during direct printing,
the scanner initializes itself and terminates direct printing.

Zoom and Printable Size

To allow for margins around the printable area for appropriate
paper feeding and printing, the maximum size of printing is limited
to be within the printable area of the printer type selected. For an 80
column printer, the maximum printable size is approximately
7.1 x 9.3 inches or 200
it is approximately 9.7 x 11.9 inches or 246 mm x 301 mm.
Direct Print Function
D-18
printing, then turn off the scanner.
halt
printer.
x 237 mm, and for a 136 column printer,
mm
whole of the scanning area is
the
an
turn the scanner back on,
this case,
again before removing the
on
operation, first set
FORM FEED
or