Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Scanner
  5. ES-1200C Pro PC
  6. Product support bulletin

Epson ES-1200C Product Support Bulletin

Epson es-1200c: support bulletin
Hide thumbs Also See for ES-1200C:

Advertisement

Quick Links

Download this manual See also: Service Manual, Reference Manual
EPSON AMERICA, INC.
Product Support Bulletin
Subject: OS/2 Warp 3.0 and Epson TWAIN
Date: 1/26/95
Page(s): 1 of 4
This bulletin describes the necessary steps to implement the Epson TWAIN driver
in a Windows 3.1 session under OS/2 Warp 3.0. This procedure will cover both
current versions of Epson TWAIN (1.03 and lower as well as 2.02 and higher) using
bidirectional parallel and SCSI interfaces.
NOTE:
TWAIN v1.03 and lower will not work with the Epson ES-1200C scanner. You must
use TWAIN 2.02 or higher. If you are using the ES-1200C with a program that has
Epson scanner support, you may need install the EPSN.SYS device driver for that
Windows session. To do this, follow steps 6 through 16 below. You will need to
obtain EPSNSY.EXE from the Epson BBS. This file has the EPSN.SYS driver
included in it. Simply copy the driver to the root directory of your boot drive.
Bidirectional Parallel Interface
Epson TWAIN v2.xx
There is no special procedure required to setup this version of the driver to run in a
Windows session under OS/2 Warp 3.0. Simply launch Windows and install the
driver.
Epson TWAIN v1.0x
Follow the steps below to enable Epson TWAIN v1.0x:
1.
From the OS/2 desktop, double click on the OS/2 SYSTEM folder
2.
Double click on the COMMAND PROMPTS folder
3.
Double click on the Win-OS12 icon.
4.
Once Windows is loaded, follow the TWAIN installation procedure. When the
installation program asks if you wish to make changes to the CONFIG.SYS or
the CONFIG.ADD, select CONFIG.ADD.
5.
Once the installation has completed, exit Windows.
6.
If the COMMAND PROMPTS folder is not open, follow steps 1 and 2.
7.
Move the mouse to the WIN-OS/2 FULL SCREEN icon. Click on the right
mouse button.
PSB No: P-0103A
Originator: CEB

Advertisement

loading

Related Manuals for Epson ES-1200C

Summary of Contents for Epson ES-1200C

  • Page 1 TWAIN v1.03 and lower will not work with the Epson ES-1200C scanner. You must use TWAIN 2.02 or higher. If you are using the ES-1200C with a program that has Epson scanner support, you may need install the EPSN.SYS device driver for that Windows session.

  • Page 2: Scsi Interface

    Click on SAVE. Close the SETTINGS notebook. The next time a Win-OS/:! session is started, you will see the EPSON device driver load. If you do not, repeat the above steps. If you have migrated a Windows application to the OS/2 desktop, apply the above steps to that icon instead of the Win-OS/2 icon.
  • Page 3 VASPI.SYS not to load. If this occurs, double check your card’s configuration and the SCSI cabling. Epson TWAIN v1.0x Follow the steps below to enable Epson TWAIN v1.0x: From the OS/2 desktop, double click on the OS/2 SYSTEM folder Double click on the COMMAND PROMPTS folder Double click on the Win-OS/2 icon.
  • Page 4 15. Click on SAVE. 16. Close the SETTINGS notebook. The next time a Win-OS/2 session is started, you will see the EPSON device driver load. If you do not, repeat the above steps. If you have migrated a Windows application to the OS/2 desktop, apply the above steps to that icon instead of the Win-OS/2 icon.
  • Page 5 A diskette containing all the files are included in each ES-300C DOS interface kit. The Epson Product Code for the kit is ES300DOS-A. The files are available from the Epson BBS. The self-extracting file name is ES300DD.EXE. The Epson BBS telephone number is (310) 782-4531.
  • Page 6 EPSON AMERICA, INC. Product Support Bulletin Subject: Image Editing Terms Date: 6/5/91 Page(s): 1 of 3 The following terms’ are used to describe image editing and grayscale in connection with scanners, monitors and printers. Additive The colors produced by mixing colored light. The primary Primary Colors: additive colors are red, green and blue.
  • Page 7 The output in 1 or 2 bit data format that simulates grayscale by creating a pattern of small dots that vary in size and density. Halftones are used in newspapers to display photographs. The Epson ES-300C supports 3 types of halftoning. Highlight: The brightest value in a continuous tone or halftone image.
  • Page 8 A relative unit of measuring resolution. Pixel size is relative, due to the output device. For example, a monitor pixel may be different in size compared to a scanner pixel. Pixels can be measured absolutely when fixed to another standard, like pixels per inch.
  • Page 9 Date: 4/3/91 Page(s): 1 of 11 Epson printers issue beep tones and/or displays error codes when certain error conditions exist. Those beeps or codes can assist you in locating and repairing customer’s printers. The following error codes are listed by product name.
  • Page 10 Printer cover is open Printer’s CPU has made a calculation error Program ROM error Font cartridge or identity cartridge checksum error RAM error Memory overflow Print overrun error Receive buffer overflow Memory error Scanner error Heater (Heat Roller Unit) error...
  • Page 11 EPL-6000 cont. ERROR 33 ERROR 40 FONT CARD ERROR INSERTION ERROR PAPER EMPTY PAPER JAM PAPER SIZE ERROR PS CHANGE EPL-7000 LCD Codes NOTE: In some cases, the red CONTINUE light flashes when an error is detected. This requires you to correct the problem and then press the CONTINUE button to dear the error.
  • Page 12 EPL-7000 cont. [S] COPY END X/X Multiple-copy printing is cancelled (you pressed the COPY END button when the printer was off line). [E] COVER OPEN The printer cover is open or the imaging cartridge is not installed. [S] DATA The printer has received data but is not yet printing, or the printer has received data and is off line.
  • Page 13 EPL-7000 cont. [E] PAPER OUT There is no paper in the standard paper cassette and the optional lower paper cassette (ii installed). Or, the paper set lever is in the manual position and you are not feeding pages correctly. [E] PAPER OUT SET AUTO XXX There is no paper in any of the paper cassettes.
  • Page 14 EPL-7000 cont. [E] REMOVE CARD You may have inserted a font card or cartridge while the printer was on line or while the FEED light was on. Data still remains in the printer’s buffer. [E] RESELECT TRAY The optional lower paper cassette is not installed and the INPUT option is set to OPT or AUTO.
  • Page 15 EPL-7000 cont. [W] TONER LOW The printer is almost out of toner. When this message first appears on the LCD display, you can print up to 25 more pages. [E] TONER OUT The imaging cartridge must be replaced. [E] TRAY SET AUTO XXX The paper size setting does not match the paper loaded in the specified paper cassette.
  • Page 16 EPL-7500 cont. [E] PAPER ENTRY JAM Paper is not feeding from the specified paper cassette or has jammed on its way into the printer. [E] PAPER EXIT JAM Paper is jammed inside the paper path. [S] PRINTING The printer has received data and is printing. [S] PRlNTlNG TEST The printer is printing the test page.
  • Page 17 EPL-7000 cont. [S] WARMING UP The printer is warming up. Note: If any of the following messages appear, turn the printer off for at least five seconds, then turn it back on. If the same message is displayed, repair is required.
  • Page 18 GQ-3500 cont. EO*03 EOo05 EOo06 E1 ~80 E1 * 81 E1 -82 E1 083 E1 084 E1 089 E1 .+ 91 E1 -92 E1 *Al E1 *A2 E1 *A3 PSB No: P-0077 Page: 10 of 11 Optical unit error. Main motor error. Fusing unit error.
  • Page 19 GQ-3500 cont. Replace the collector unit and lens shield. Replace the drum cartridge and lens shield. PSB No: P-0077 Page: 11 of 11...

This manual is also suitable for:

Es-300cOs/2 warp 3.0Twain v.2Twain v 1.0