Installing The Scsi Interface Board - Epson ES-300C User Manual

Installing the SCSI Interface Board

You install the SCSI board into the option board slot located on the
back panel of the scanner as described below.
CAUTION:
daisy chain, you must have the terminator resistors
removed from the SCSI board by your dealer before
installing the board in the scanner.
Turn off the scanner and disconnect the power cable and any
1.
other interface cables connected to the scanner.
WARNING:
power cable before installing or removing an optional
interface board,
C-6 Connecting the Scanner to a Macintosh
To connect the ES-300C in the middle of a
Always turn off the power and disconnect the