Advertisement
Quick Links
Download this manual
See also:
Reference Manual
scanning
scanning
Scanner Specifications
Scanner type:
Sheet-fed image scanner, monochrome
Photoelectric
CCD line sensor
device:
Scanners
rubber
friction
parallel in/t&ace
connector
rubber
friction
interface
connector
switch
Maximum
216 mm by 356 mm (8.5 inches by
document size:
14 inches) US legal size
Minimum
55 mm by 90 mm (2.2 inches by
document size:
3.5 inches) business card (with the
attachable card guide)
Document
capacity:
(60 g/m2 to 90 g/m2)
5 sheets for thermal paper
(thickness 0.05 mm)
7 sheets for checks (thickness 0.16 mm)
3 sheets for business cards (thickness
0.1 mm to 0.23
card guide
Scanning speed:
4 ppm (A4 or letter, 300 dpi BW)
Optical resolution:
300 dpi
Output resolution:
50 dpi to 600 dpi
Output mode:
Error diffusion: 3 modes
Dither: 4 resident modes and one user-
defined mode
A/D converter:
8 bits
Image sensor:
256 levels
Text enhancement:
Background elimination technology
Brightness:
7 levels
Contrast:
256 levels
Gamma correction:
5 resident tables (linear, analog monitor,
3 printers)
sharpness:
5 levels
Interface:
Bidirectional parallel or SCSI
Light source:
White fluorescent lamp
Reliability:
Main unit:
Lamp life:
Dimensions
and weight:
Depth: 210 mm (8.3 in&es)
Height: 66 mm (2.6 inches)
Weight: approx. 2.9 kg (6.3 lb)
Paper feed:
Input:
output: face down
4/96
EPSON ES-300GS
with the attachable
mm)
2000 hours
face down
EPSON ES-300GS-1
Advertisement
Related Manuals for Epson ES-300GS
Summary of Contents for Epson ES-300GS
-
Page 1: Scanner Specifications
Reliability: Dimensions and weight: Paper feed: 4/96 EPSON ES-300GS 216 mm by 356 mm (8.5 inches by 14 inches) US legal size 55 mm by 90 mm (2.2 inches by 3.5 inches) business card (with the attachable card guide) -
Page 2: Electrical Specifications
EPSON ES-300GS Electrical Specifications 100 V-120 V model Rated voltage: AClOOVto12OV Input voltage AC9OVto132V range: Rated frequency: 5OHzto6OHz Input frequency : 49.5 Hz to 60.5 Hz Power Approx. 35W consumption: Safety and EMI 100 v-l.20 v model: Safety regulation: UL 1950, CSA 22.2 No. 950... -
Page 3: Scsi Interface Specifications
These cables should be shielded and the ground connected to the chassis of the host computer and the scanner. Cl All interface conditions are based on TTL level. Scanners... -
Page 4: Problems And Solutions
0 When the power is turned on. 0 When the scanner receives an ZiT signal at the parallel interface (pin 31 goes low). 0 When the scanner receives a SCSI Reset signal at the SCSI interface. Software initialization: 0 When the software command ESC @ (initialize the scanner) is received. -
Page 5: Information Reference List
Contact your dealer or a.qualified service person for assistance. Turn off the scanner and remove any paper that may be jammed in the document feeder. If the scanner still does not operate properly, or if this error occurs repeatedly, consult your dealer.