Installation; Unpacking Checklist - Sharp FO-5600 Operation Manual

Table of Contents

Advertisement

YF
<P=001>
After unpacking your fax, make sure you have all the items shown below. If any are
missing, contact your dealer.
Telephone line
cord
Adapter
(for Australia)
Adapter
(for New Zealand)
Received
document tray
Original document
OUT tray
Precautions before setting up
The printing unit in the fax generates a small amount of ozone during operation.
The amount is not large enough to be harmful; however, the fax should only be in-
stalled in a ventilated room.
The fax must be installed on a level surface.
Keep the fax away from air conditioners, heaters, direct sunlight, and dust.
If your area experiences a high incidence of lightning or power surges, we recom-
mend that you install surge protectors for the power and telephone lines. Surge pro-
tectors can be purchased at most telephone specialty stores.
If the fax is moved from a cold to a warm place, it is possible that condensation may
form on the reading glass, preventing proper scanning of documents for transmis-
sion. To remove the condensation, turn on the power and wait approximately two
hours before using the fax.
1

INSTALLATION

UNPACKING CHECKLIST

INSTALLATION
FO5600A-ISUN
Rapid key labels
A4 paper
size labels
Business products dealer
installation report
Document
carrier
Operation
manual
Toner cartridge
Drum cartridge
1-1

Advertisement

Table of Contents
loading

Table of Contents