Sharp FO-5600 Operation Manual page 61

<P=003>
POLLING
5
START
To clear a document
Step Press these keys:
FUNCTION
1
2
2
START
3
Polling Security
Polling Security allows you to prevent unauthorized polling of your fax. When this
function is activated, polling will only take place when one of the following conditions
is met:
The fax number of the polling fax machine has been stored in your fax's list of
permitted fax numbers (called "passcode numbers"). The polling fax must also have
its fax number correctly programmed into itself, as described in "Entering your
name and fax number" in Chapter 2.
A System number has been programmed in the polling fax machine which matches
your fax's System number or one of your ID numbers.
An ID number has been programmed in the polling fax machine which matches
your fax's System number.
System and ID numbers are 4-digit numbers which provide you with an alternate
means of giving and receiving polling permission when you don't want to use fax
numbers. The steps for programming these numbers are described in the following
pages.
Note:
System and ID numbers can only be used if the other fax machine is also a Sharp
machine.
Turning Polling Security on and off
Polling Security is turned on or off with Option Setting 6. The procedure is described in
Chapter 5, "Optional Settings".
4-14
START Press the START key twice.
The document will be scanned into
memory, and your fax will go on polling
standby.
Comments
"MEMORY POLL MODE" will appear in the
9
display.
Select CLEAR.
The document will be cleared.
SPECIAL FUNCTIONS