Optional Settings - Sharp FO-5600 Operation Manual

YF <P=001>
A variety of optional settings are available which you can use to fine-tune your fax to
better suit your needs. The settings are made by pressing the panel keys, and each
setting is described in the list below.
Accessing the settings
Step Press these keys:
FUNCTION
1
2
3
STOP
4
Settings
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is not made with the
RESOLUTION key) for transmitting documents. Press 1 (YES) to set the default resolution to
FINE, or 2 (NO) to set it to STANDARD.
Initial setting: 2
Setting 2: NUMBER OF RINGS TO ANSWER
This option sets the number of rings the fax machine waits before answering an incoming call in
AUTO reception mode. Enter any number from 2 to 4 (if 0 is entered your fax will answer
without ringing).
Initial setting: 2
Setting 3: NUMBER OF RINGS MANUAL RECEPTION
This sets your fax to automatically answer a call after a certain number of rings when it is in
manual reception mode. Any number from "2" to "4" can be entered (enter "0" if you don't want
your fax to answer automatically).
Initial setting: 0
5

OPTIONAL SETTINGS

Comments
4
OPTIONAL SETTING will appear in the display.
Move through the list of settings by pressing "#"
to move forward, or "
settings will appear in the order listed below.
or
Press START when the desired setting appears.
Or, you can also go directly to a setting by
START
entering the number of the setting (do not press
START in this case). If the number is less then
10, enter "0" first.
When the desired setting appears in the display,
2
(Example)
change it appropriately as described below.
STOP
Press STOP to return to the date and time
display.
OPTION SETTINGS
FO5600A-OSOS
*
" to move backward. The
5-1