Receiving Documents - Sharp FO-5600 Operation Manual

YF <P=001>
Your fax has two modes of reception: AUTO and MANUAL. With MANUAL reception,
you must first answer the call on an extension telephone connected to the same line
and then press the START key on your fax to receive a document. With AUTO
reception, your fax automatically answers each call and receives the incoming
document.
AUTO reception is most useful when you want to use your line as a dedicated fax
line (you will only be receiving faxes on it).
MANUAL reception is most useful when you will be receiving both voice calls and
fax messages on the same line.
Setting the mode of reception
The reception mode has been set to AUTO at the factory. If you want to change the
setting, follow the steps below.
Step Press these keys:
FUNCTION
1
2
AUTO reception
In AUTO reception mode, the fax automatically answers all calls after 2 rings and
receives the incoming documents.
You can change the number of rings on which the fax answers incoming calls by
changing Option Setting 2 (see Chapter 5, "Optional Settings"). Any number from
"2" to "4" can be selected.
If you pick up an extension phone before your fax answers, you can talk to the other
party and/or receive a document as described below in "MANUAL reception".
3-14

RECEIVING DOCUMENTS

Comments
1
"RECEIVE MODE" will appear in the display.
Press "1" to select AUTO, or "2" to select
or
1 2
MANUAL.
BASIC OPERATIONS
FO5600A-BORD