Specifications - Sharp FO-5600 Operation Manual

YF <P=001>
Applicable telephone line:
Compatibility:
Configuration:
Compression scheme:
Memory size*:
Memory option:
Scanning method:
Resolution:
Printing density:
Reception modes:
Modem speed:
Transmission time*:
Input document size:
Paper capacity:
Automatic document feeder:
Effective scanning width:
Effective recording width:
Copy function:
Halftone (grey scale):
Power requirements:
Operating environment:
Power consumption:
Dimensions:
Weight:
* Based on ITU-T Test Chart #1 at standard resolution in Sharp special mode, excluding time
for protocol signals (i.e., ITU-T phase C time only).
As a part of our policy of continuous improvement, SHARP reserves the right to make design
and specification changes for product improvement without prior notice. The performance
specification figures indicated are nominal values of production units. There may be some
deviations from these values in individual units.

SPECIFICATIONS

Public switched telephone network
ITU-T (CCITT) G3 mode
Half-duplex, desktop transceiver
MH, MR, MMR and Sharp special mode
1 MB (approx. 50 average pages)
1 MB / 2 MB / 4 MB flash memory
Flat-bed, solid-state CCD
Horizontal:
8 lines/mm
Vertical:
Standard 3.85 lines/mm
Fine /Halftone 7.7 lines/mm
Super fine 15.4 lines/mm
Horizontal
16 lines/mm
Vertical
15.4 lines/mm
Auto/Manual switching
33,600 bps with automatic fallback to 31,200/ 28,800/ 26,400/ 24,000/
21,600/ 19,200/ 16,800/ 14,400/12,000/ 9600/ 7200/ 4800 or 2400 bps
Note:Transmission speeds in Super G3 modo may vary due to tele-
phone line conditions.
Approx. 3 seconds (Super G3)
Automatic feeding:
Width 148 to 280 mm
Length 128 to 364 mm
Manual feeding:
Width 148 to 280 mm
Length 128 to 432 mm
650 sheets
50 documents max.
256 mm
203 mm
Single/Multi-copy/Sort-copy (99 copies/page)
64 levels
230 - 240 V AC, 50 Hz
10 - 30 C, 20 to 85% RH
Stand-by: 11 W
Maximum: 550 W
Width: 351 mm
Depth: 582 mm
Height: 469 mm
Approx. 26 kg
SPECIFICATIONS
FO5600A-SPSP
Spec-i