Sharp FO-5600 Operation Manual page 87

<P=002>
OPTIONAL SETTINGS
Setting 4: ACTIVITY REPORT AUTO PRINT OUT
Press "1" (YES) to have your fax automatically print out an Activity Report once every 50
operations. (The report can still be printed out manually when desired.) Press "2" (NO) to turn
automatic print-out off.
Initial setting: 2
Setting 5: TRANSACTION REPORT PRINT SELECT
This sets the condition for printing out a Transaction Report. Enter a number from 1 to 5 as
follows:
1
" " (ERROR/TIMER/
MEMORY):
" 2 " (SEND ONLY):
3
" " (ALWAYS PRINTS):
" 4 " (NEVER PRINTS):
5
" " (ERROR ONLY):
Initial setting: 5
Setting 6: SECURITY SELECTION
Press "1" (ON) to turn polling security on, or "2" (OFF) to turn it off.
Initial setting: 1
Setting 7: ERROR CORRECTION MODE (ECM)
Press "1" (YES) to have any distortions in a transmission due to noise on the telephone line be
corrected before print-out at the receiving end. This is only effective when the other machine
has ECM as well. Press "2" (NO) to turn the function off.
Initial setting: 1
Setting 8: AUTO COVER SHEET
Press "1" (YES) to have the fax automatically generate a cover sheet and send it as the last
page of each transmission. Press "2" (NO) to turn the function off.
Initial setting: 2
Setting 9: MEMORY SCANNING
Press "2" (REDUCE) to have the fax reduce the size of documents wider than 226 mm when it
scans them into memory for transmission operations. If "1" (1:1) is pressed, the document will
be stored at actual size, and if the receiving machine only uses 210 mm paper, the parts outside
of that width will not be printed.
Initial setting: 2
5-2
A report will be printed after an error, timer operation, or
memory operation.
A report will be printed only after a transmission.
A report will be printed after each transmission, reception,
or error.
A report will never be printed.
A report will be printed only after an error occurs.
OPTION SETTINGS