Entering Letters For Names - Sharp FO-1650 Operation Manual

Names are programmed by pressing the number keys. You will notice that letters
are marked above each of the number keys "
number), press the appropriate key one or more times until the letter appears in the
display (the number will appear first, followed by the letters in the order marked
above the key). The keys used for entering letters and editing are shown below.
Space
Press this key twice to
enter a space.
ABC
1 2
GHI JKL
4 5
PRS TUV
7 8
SLOW PLAY OPER
0
Symbols
Press either key repeatedly until the
desired symbol appears (see the
symbol list on the following page).
Comments:
Enter "Q" with the "7" key, and "Z" with the "9" key (these are not marked on the
machine).
To enter two letters in succession which require using the same key, press the
SPEAKER key once after entering the first letter, then enter the second letter.
To change one individual letter to another, move the cursor to that letter and
enter the desired letter. The new letter will simply replace the old one.

ENTERING LETTERS FOR NAMES

Letters and numbers
To enter a letter or number, press
the appropriate key repeatedly until
the desired number/letter appears
in the display (the number appears
first, then the letters in the order
marked above the key).
DEF
S P E E D D I A L
3
MNO
R E D I A L
6
WXY
H O L D / S E A R C H
9
FAST PLAY
S P E A K E R
INITIAL SETTINGS
2 9
" through " ". To enter a letter (or
Delete
Press this key to delete the
letter highlighted by the cursor
(if the cursor is to the right of
the last letter entered, it will
backspace and delete the last
letter).
Shift
Press this key once to change
case (press it again to change
back).
Cursor left
Press this key to move the
cursor to the left.
Cursor right
Press this key to move the
cursor to the right.
2-5