Reception Errors; Timer List - Sharp FO-1650 Operation Manual

Reception errors

E-0
Able to recognize handshake signal, but it has errors.
E-1
Line disconnected during reception.
E-2
Cannot recognize the handshake signal from the transmitter side.
E-3
Cannot recognize the last handshake signal from the transmitter side.
Cannot recognize the handshake signal for next page from the transmitter side in the
E-4
case of mode change.
E-5
Cannot recognize the handshake signal for next page from transmitter side.
E-7
No response from transmitter or "disconnect signal" is received at receiver side.
E-8
Error occurred upon completion of reception of all pages.
Error occurred when mode was changed or transmission/reception switching was
E-9
performed.
E-10
Error occurred during partial page or physical page reception.
Error occurred after or during inquiry from the remote (transmitting) machine as to
E-11
whether reception was possible or not.
E-12
Error occurred during or just after fallback.
E-13
Error occurred after retransmission end command was received.
E-14
Error occurred after voice communication command was received.

Timer list

This list shows the timer operations which are currently set.
PRINTING OUT REPORTS AND LISTS
PRINTING OUT REPORTS AND LISTS
9-3