Entering Letters For Names - Sharp FO-2600 Operation Manual

ENTERING LETTERS FOR NAMES

Names are programmed by pressing the number keys. You will notice that letters are
marked above each of the number keys "2" through "9". To enter a letter (or number),
press the appropriate key one or more times until the letter appears in the display (the
number will appear first, followed by the letters in the order marked above the key).
The keys used for entering letters and editing are shown below.
Space
Press this key twice to
enter a space.
ABC
1
GHI JKL
4
PQRS TUV
7
Symbols
Press either key repeatedly until
the desired symbol appears (see
the symbol list below).
Comments:
To enter two letters in succession which require using the same key, press the SPEAKER
key once after entering the first letter, then enter the second letter.
To change one individual letter to another, move the cursor to that letter and enter the
desired letter. The new letter will simply replace the old one.
Symbol list
To enter a symbol from the list below, press the "#" key or the "*" key repeatedly
until the desired symbol appears.
#
. / ! " # $ % & ' ( ) + + , - : ; < = > ? @ [ ¥ ] ^ _ p { | }
Letters and numbers
To enter a letter or number, press
the appropriate key repeatedly until
the desired number/letter appears
in the display (the number appears
first, then the letters in the order
shown above the key).
DEF
S P E E D
2 3
MNO
R E D I A L
5 6
WXYZ
R
8 9
S P E A K E R
0
INITIAL SETTINGS
Delete
Press this key to delete the
letter highlighted by the cursor
(if the cursor is to the right of
the last letter entered, it will
backspace and delete the last
letter).
Shift
Press this key once to change
case (press it again to change
back).
Cursor left
Press this key to move the
cursor to the left.
Cursor right
Press this key to move the
cursor to the right.
*
2-3