Entering Letters For Names - Sharp FO-4500 Operation Manual

<P=001>
YF

ENTERING LETTERS FOR NAMES

Names are programmed by pressing the letter entry keys (if the Rapid Key overlay is
up, first flip it down). To enter a letter, press the key on which the letter is marked. The
letter will appear in the display.
A B C
I J K
Q R S
Y Z
SPACE
Space
Press this key to enter
a space.
Shift
Press this key once to
change case (press it
again to change back).
Comments:
• •
To change a letter, move the cursor to that letter and enter the desired letter. The new letter
will replace the old one.
• •
To enter a number as part of a name, press the appropriate numeric key on the telephone
dial keypad.
Symbol list
To enter a symbol from the list below, press the "SP" key repeatedly until the
desired symbol appears. (Note: To enter two symbols in a row, press the ) key
after you enter the first symbol.)
! " # $ % & ' ( )
D E F G H
L M N O P
T U V W X
SHIFT SP CLEAR
Symbols
Press this key repeatedly
until the desired symbol
appears (see the symbol
list below).
+ , - / : ; < = > ? [ ¥ ] ^ _
INITIAL SETTINGS
FO4500H-IPEL
Letters
To enter a letter, press the
key on which the letter is
marked.
Cursor right
Press this key to move the
cursor to the right.
Cursor left
Press this key to move the
cursor to the left.
Delete
Press this key to delete the letter
highlighted by the cursor (if the
cursor is to the right of the last
letter entered, it will backspace
and delete the last letter).
{ | } → ← @ .
2-5