Sharp FO-1650 Operation Manual page 125

Section 6. Physical Chemical Characteristics
Boiling/Melting Point
Vapor Pressure
Vapor Density
Evaporation Rate
Appearance
Odor
Section 7. Fire and Explosion Data
Flash Point (Method Used):
Ignition Temperature:
Flammable Limits:
Extinguishing Media:
Special Fire Fighting Procedure:
Unusual Fire and Explosion Hazard:
Sensitivity to Mechanical Impact:
Sensitivity to Static Charge:
Section 8. Reactivity Data
Stability:
Incompatibility (Materials to Avoid):
Hazardous Decomposition:
Hazardous Polymerization:
Section 9. Precautions for Safe Handling and Use
Personal Protection Information (Respiratory, Eye Protection and Protective Glove):
Engineering Control/Ventilation:
Work/Hygienic Practice:
Steps to be taken in case of Spill or Leak:
Waste Disposal Method:
Section 10. Other Information
NFPA Rating (U.S.A.):
WHMIS Legislation (Canada):
Transport Information:
UN No.:
SHARP
MATERIAL SAFETY DATA SHEET
m.p. about 70 C
for ink
not applicable
not applicable
negligible
thin film coated
with ink
slight wax odor
about 250 C for ink
not applicable
not applicable
CO2, water, dry chemicals and form etc.
especially none
none
no hazardous effect by mechanical impact
not applicable
Stable
especially none
not applicable
not applicable
not required
especially none
especially none
If rumple the product and wax layer peel off, sweep up or clean with
vacuum cleaner and wash with water.
Disposein an approved incinerator or contrct with licensed chemical
disposal agency.
ensure conformity with governmental disposal regulations. (Dispose by
the same method of ordinary plastic products.)
no information
not controlled
no information
no information
Specific Gravity
Solubility
PH
Viscosity
Color
(LEL); (UEL);
Date Issued: Feb. 9,1996
MSDS No. B-1006
about 1
negligible (water)
not applicable
not applicable
black