Sharp FO-1650 Operation Manual page 35

Note that the above assignment of ringing patterns to boxes is not affected by
the distinctive ringing setting for FAX mode described on the previous page. The
above assignment is effective when the fax is in TAD mode, and the selection
made for FAX mode is effective when the fax is in FAX mode.
An outgoing message must be recorded for each box used with distinctive ringing.
If an outgoing message is not recorded for a box, the answering machine will not
answer when the corresponding number is dialed. However, if you have selected
that ringing pattern for fax reception in FAX mode as described on the previous
page, the fax will answer that pattern and receive a document just like it does in
FAX mode.
As an example, you could have the answering machine answer only the standard
ringing pattern by recording an outgoing message only for the General Box. The
other patterns would be left free, so you could use one of them for fax reception as
described on the previous page, and another for a computer modem or other
device.
To turn distinctive ringing in TAD mode on, press the panel keys as follows:
1
FUNCTION
2
1
3
S T O P
0
2
or
INITIAL SETTINGS
DISTINCTIVE RINGING
Press the keys shown at left. "DISTINC-
TIVE RING" will appear in the display.
1
Press " " to turn distinctive ringing in
2
TAD mode on, or "
STOP
Press the key.
" to turn it off.
2-19