Sharp FO-1650 Operation Manual page 69

Note: If needed, you can turn the Transfer function on or off from a remote loca-
tion. See "Other remote operations" in the previous section, "Remote opera-
tions".
Override Ringing
This function allows selected callers using a touch-tone telephone to override the
answering machine's outgoing message and cause the FO-1650/1850 to make a
special ringing sound, alerting you that they are calling. This is useful when you are
near the machine but only want to talk with certain callers, taking all other calls on
the answering machine.
Programming the override code
To override the answering machine, your callers must enter a 3-digit override code
from their telephone. This code has been set to "009" at the factory. If you want to
change it, press the panel keys as shown below.
Important!
Make sure the override code is different from the remote code or any passcodes
programmed for boxes.
1
FUNCTION
2
3
5
4
S T A R T
0
5 4
(Example)
S T O P
USING THE ANSWERING MACHINE
OTHER FUNCTIONS
Press the keys shown at left. "T.A.D.
SETTINGS" will appear in the display.
Press the keys shown at left. "OVER-
RIDE CODE" will appear in the display.
Enter a 3-digit code number by pressing
the number keys.
START
Press the key and then the
STOP
key.
4-15