Other Functions - Sharp FO-1650 Operation Manual

Transfer function
The Transfer function is used to make the FO-1650/1850 automatically call you at a
specified number every time it receives an incoming message in a selected box.
This allows you to hear your messages immediately after they come in, even when
you are at a remote location.
When you answer the telephone, you will hear your recorded message telling you
that the call is a transfer call. Enter "
your remote code number if the box has no passcode), and "
will then play back your messages. You can also perform any of the remote
operations described in the previous section.
Note: When you hang up after a transfer call, the FO-1650/1850 will not immedi-
ately resume normal operation. If you want the FO-1650/1850 to accept
calls immediately after a transfer call, enter "*" twice before hanging up (if
you want to hang up during message playback, first enter " 0" and " #" to
stop playback, then enter "*" twice).
Programming the transfer number
To use the Transfer function, you must first give the FO-1650/1850 the number to
call (the transfer number). This is done by pressing the panel keys as follows:
1
FUNCTION
2
3
4
5 5
5
S T A R T

OTHER FUNCTIONS

#
0
S T A R T
5 1 2 3
(Example)
S T O P
USING THE ANSWERING MACHINE
", the box number, the box's passcode (or
Press the keys shown at left. "T.A.D.
SETTINGS" will appear in the display.
Press the keys shown at left. "TRANS-
FER # ENTRY" will appear in the display.
START
Press the
Enter a transfer number (max. of 32 dig-
4
its including pauses) by pressing the
number keys.
START
Press the
STOP
key.
#
". The FO-1650/1850
key.
key and then the
4-13