The date and time appear in the display and reports, and are printed at the top of
every page you transmit. Set the date and time by pressing the keys on the
operation panel as shown below.
To correct a mistake, press the
the mistake, and then enter the correct number.
1
FUNCTION
2
3
S T A R T
4
0
1
5
5
0
6
9
6
7
9
0
(Example: 9:25)
8
or
9
S T A R T
SETTING THE DATE AND TIME
SPEED DIAL
3
(Example: January)
(Example: the 5th)
(Example: 1996)
2
5
S T O P
INITIAL SETTINGS
key to move the cursor back to
Press the keys shown at left. "ENTRY
MODE" will appear in the display.
Press the keys shown at left. "DATE &
TIME SET" will appear in the display.
START
Press the
key.
Enter a 2-digit number for the month
("01" for January, "02" for February, "12"
for December, etc.).
Enter a 2-digit number for the day ("01"
to "31").
Enter the last 2 digits of the year. (Note:
In the year 2000, "00" will appear for the
year.)
Enter a 2-digit number for the hour ("01"
to "12") and a 2-digit number for the min-
ute "00" to "59").
Press "*" to select A.M., or "
P.M.
START
Press the
key and then the
STOP
key.
#
" to select
2-7