Connecting The Phone Line - Brother MFC440CN - Color Inkjet - All-in-One Quick Setup Manual

STEP1
Setting Up the Machine
8
While holding the paper tray in place, pull out
the paper support ( ) until it clicks, and then
unfold the paper support flap (
Note
Do not use the paper support flap for Legal paper.
Note
• You can use the photo bypass tray which is
located on the top of the paper tray to print on
photo 4 x 6 in. (10 x 15 cm) and photo L size paper.
• For details, see Loading photo paper in Chapter 2
of the User's Guide.
3

Connecting the phone line

1
Connect the telephone line cord. Connect one
end of the telephone line cord to the jack on the
machine marked LINE and the other end to a
modular wall jack.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
6
Note
If you are sharing one phone line with an external
).
telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one phone line with an external
telephone answering machine, connect it as
shown below.
Set the receive mode to 'External TAD' if you
have an external answering machine. For
details, see Connecting an external TAD
(telephone answering device) in Chapter 7 of
the User's Guide.
1
2