Connecting The Phone Line - Brother MFC-845CW Quick Setup Manual

Hide thumbs Also See for MFC-845CW:
Table of Contents

Advertisement

STEP1
Setting Up the Machine
8
While holding the paper tray in place, pull out
the paper support ( ) until it clicks, and then
unfold the paper support flap (
Note
Do not use the paper support flap for Legal size
paper.
Note
• You can use the photo paper tray which is located
on the top of the paper tray to print on photo
10 x 15 cm (4 x 6 in) and photo L size paper.
• For details, see Loading envelopes, post
cards and photo paper in Chapter 2 of the User's
Guide.
8
9
).
1
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
1 Extension telephone
2 External telephone
Note
If you are sharing one phone line with an external
telephone answering machine, connect it as
shown below.

Connecting the phone line

Connect the telephone line cord. Connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a modular wall socket.
1
2

Advertisement

Table of Contents
loading

Table of Contents