Setting Tone Or Pulse Dialing Mode; Choosing A Receive Mode - Brother MFC440CN - Color Inkjet - All-in-One Quick Setup Manual

STEP1
Setting Up the Machine
Press One time
key
2
3
4
5
6
7
8
9
6
Press Stop/Exit.
Note
If you want to repeat input, press Stop/Exit to start
from step 1.
For details, see Entering Text in Appendix C
of the User's Guide.
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless such
messages clearly contain, in a margin at the top or
bottom of each transmitted page, or on the first
page of the transmission, the date and time it is
sent and an identification of the business or other
entity or other individual sending the message and
the telephone number of the sending machines or
such business, other entity or individual.
To program this information into your machine,
see Setting the date and time on page 11 and
Setting your station ID on page 11.
11 Setting tone or pulse dialing
mode
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Tone/Pulse.
Press OK.
4
Press a or b to choose Pulse (or Tone).
Press OK.
5
Press Stop/Exit.
12
Two Three
times times
A B C
D E F
G H I
J K L
M N O
P Q R
T U V
W X Y
12

Choosing a Receive Mode

Four
times
2
There are four possible receive modes: Fax Only,
3
Fax/Tel, Manual and External TAD.
4
Do you use a Distinctive
5
Ring subscriber service?
6
No
S
Are you connecting an external telephone or external
8
TAD (telephone answering device) to the machine?
Z
Yes
Are you using the voice
message function of your
external TAD (telephone
answering device)?
No
Do you want the machine to answer fax and
telephone calls automatically?
Do you want to use the machine for fax only?
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Receive Mode.
Press OK.
4
Press a or b to choose the mode.
Press OK.
5
Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.
See Distinctive Ring
Yes
in Chapter 7 of the
User's Guide.
Yes
Fax Only
Yes
Your machine
automatically answers
every call as a fax.
No
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
No
Manual
You control the phone
line and must answer
every call yourself.
Yes
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored on
the external TAD. Fax
messages are printed.
No