Choosing Your Language (Canada Only); Setting The Lcd Contrast - Brother MFC440CN - Color Inkjet - All-in-One Quick Setup Manual

STEP1
Setting Up the Machine
5
Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
OK
6
The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
Yes iPress 1
No
Color OK?
Yes iPress 1
No
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
Start Cleaning?
Yes iPress 1
No
7
Press 1 (Yes), the machine will then start
cleaning the colors.
8
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again and goes back to step 3.
10
Poor
iPress 2
iPress 2
iPress 2
7 Choosing your language
(Canada only)
1
Press Menu.
2
Press a or b to choose Initial Setup.
Press OK.
3
Press a or b to choose Local Language.
Press OK.
4
Press a or b to choose your language
(English or French), and then press OK.
Local Language
English
French
5
Press Stop/Exit.
8

Setting the LCD contrast

You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty reading
the LCD, try changing the contrast setting.
1
Press Menu.
2
Press a or b to choose General Setup.
Press OK.
3
Press a or b to choose LCD Settings.
Press OK.
4
Press a or b to choose LCD Contrast.
Press OK.
5
Press a or b to choose Light, Med or Dark.
Press OK.
6
Press Stop/Exit.
Note
You can also adjust the angle of the LCD display
by lifting it.