Connecting The Phone Line - Brother MFC-5460CN Quick Setup Manual

Note
When you put the paper into the paper tray, slide
the paper in making sure that it touches the paper
length guide (1) first, then gently lower the other
end of the paper.
1
6
Gently adjust the paper side guides with both
hands to fit the paper.
Make sure the paper side guides touch the
sides of the paper.
Note
Be careful that you do not push the paper in too
far; it may lift at the back of the tray and cause feed
problems.
7
Close the tray cover.
8
Slowly push the paper tray completely into the
machine.
Setting Up the Machine
4

Connecting the phone line

1
Connect the telephone line cord. Connect one
end of the telephone line cord to the jack on the
machine marked LINE and the other end to a
modular wall jack.
Improper Setup
DO NOT connect the interface cable.
Connecting the interface cable is done during
the software installation process.
Note
If you are sharing one phone line with an external
telephone, connect it as shown below.
1 Extension telephone
2 External telephone
1
2
7