Storing, Editing, And Deleting From The Touch Panel - Sharp AR-C260 Network Scanner Operations

STORING, EDITING, AND DELETING
FROM THE TOUCH PANEL
One-touch and group keys for Scan to E-mail, group indexes, and senders can also be stored, edited and deleted
from the touch panel of the machine.
STORING ONE-TOUCH KEYS (only addresses for Scan to E-mail)
The touch panel of the machine can also be used to store destinations for Scan to E-mail. (Scan to FTP destinations
must be stored using the Web page
Scanner Tool (page 9).)
1 Press the [CUSTOM SETTINGS] key.
Touch the [ADDRESS CONTROL] key.
2
ADDRESS
CONTROL
KEY OPERATOR PRO
3 Touch the [DIRECT ADDRESS] key.
DIRECT ADDRESS
CUSTOM INDEX
E-MAIL SENDER
Touch the [INDIVIDUAL] key.
4
DIRECT ADDRESS
STORE
INDIVIDUAL GROUP
(page 8), and Scan to Desktop destinations must be stored using Network
TABLE OF CONTENTS
5 Touch the [NAME] key.
DIRECT ADDRESS / INDIVIDUAL
No.001
NAME
INDEX
ADD
KEY NAME
6 Touch the [INITIAL] key.
NEXT EXIT
INITIAL
Touch a letter key.
7
DIRECT ADDRESS / INDIVIDUAL
No.001
INITIAL
NOTE
The initial you enter here determines the position of
the one-touch key in the ABC index. For information
on the ABC index, refer to
8 Touch the [OK] key.
NEXT EXIT
OK
OTHERS
25
The "No." that automatically
appears is the lowest
number from 001 to 500 that
has not yet been
programmed. When [NAME]
is touched, the letter-entry
screen appears. Enter up to
36 characters for the name.
The first letter (initial) of
the name entered in step
5 is initially selected and
is highlighted. If you
wish to change the
letter, touch a different
letter key.
page 15.