Sharp AR-C260 Network Scanner Operations page 38

KEY OPERATOR PROGRAMS
This section explains the key operator programs that are related to the network scanner feature of the machine. For
key operator programs that are related to the printer and copy functions of the machine, refer to KEY OPERATOR'S
GUIDE and "Operation manual (for printer)".
KEY OPERATOR PROGRAM LIST
Program name
Network scanner settings
Default display settings
The number of direct address keys displayed setting 37
Initial resolution setting
Scan complete sound setting
Default sender set
Compression mode at broadcasting
Initial file format setting
Maximum size of e-mail attachments
USING THE KEY OPERATOR PROGRAMS
Follow the steps below to use the key operator programs.
1 Press the [CUSTOM SETTINGS] key.
Touch the [KEY OPERATOR PROGRAMS]
2
key.
ADDRESS
CONTROL
KEY OPERATOR PROGRAMS
3 Use the numeric keys to enter the five-digit
key operater code number.
KEY OPERATOR CODE
Page
37
38
38
38
38
38
38
Each time a number is
entered, the dashes (-)
in the display will change
to asterisks ( ).
TABLE OF CONTENTS
4 Touch the [N/W SCANNER SETTINGS] key,
depending on the program you wish to use.
OPERATION
ENERGY SAVE
SETTINGS
PRINTER N/W SCANNER
SETTINGS SETTINGS
KEY OPERATOR
PRODUCT KEY
CODE CHANGE
5 Make desired settings for the selected
program.
Detailed descriptions for program settings start on
the next page.
6 Touch the [OK] key to return to the screen
of step 4.
OK
7 Press the [CA] key to exit the program.
36
If you wish to use
another program, touch
the key for that program
in the screen of step 4.