Sharp AR-C260 Network Scanner Operations page 28

STORING, EDITING, AND DELETING FROM THE TOUCH PANEL
Touch the [INDEX] key.
9
DIRECT ADDRESS / INDIVIDUAL
NAME SHARP CORPORATION
ADDRE
INDEX
KEY NAME
10
Touch an index key.
DIRECT ADDRESS / INDIVIDUAL
INDEX
SELECT THE CUSTOM INDEX WHERE YOU REGISTER THIS ADDRESS.
USER 1 USER 2 USER 3
DO YOU REGISTER THIS ADDRESS AT THE [FREQUENT USE], TOO?
YES
Select one of the upper row of keys ([USER 1]
through [USER 6]) to determine the location of the
one-touch key when the GROUP index is displayed
instead of the ABC index (refer to
The lower keys are for selecting whether to include
the one-touch key in the [FREQUENT USE] index.
If you touch the wrong key, simply touch the
correct key.
11
Touch the [OK] key.
12
Touch the [ADDRESS] key.
P CORPORATION
ADDRESS
13
Enter the e-mail address of the destination.
E-MAIL ADDRESS
ppd1@sharp.co
SPACE
Up to 64 characters can be entered.
If you make a mistake, touch the
the cursor ( I ) back one space and then enter the
correct character.
NEXT EXIT
OK
USER 4 USER 5
USER 6
NO
page 15).
The E-mail address
entry screen appears.
CANCEL OK
ABC abc
AB/ab 12#$%
key to move
TABLE OF CONTENTS
14
Touch the [OK] key.
You will return to the one-touch key programming
screen.
REGISTRATION IS COMPLETED will appear
highlighted to the right of "No.".
NOTE
The "ADDRESS" line only shows 32 digits,
regardless of how many were digits actually
programmed.
15
Check the key name.
The characters appearing next to the [KEY NAME]
key will be displayed in the key. Only the first 18
characters of the name entered in step 5 will be
displayed.
If you need to change the name that will be
displayed in the key, touch the [KEY NAME] key.
DIRECT DDRESS / INDIVIDU L
No.001 REGISTRATION IS COMPLETED.
NAME SHARP CORPORATION
INDEX USER 3 ADDRESS
KEY NAME SHARP CORPORATION
FILE FORMAT B/W PDF /HIG
16
Check the file format and the compression
mode.
REGISTRATION IS COMPLETED.
No.001
NAME SHARP CORPORATION
INDEX USER 3 ADDRE
KEY NAME SHARP CORPORATION
B/W PDF /HI
FILE FORMAT
Settings for colour scanning
File type: PDF*/JPEG
Compression mode: LOW/MEDIUM*/HIGH
Settings for black and white scanning
File type: PDF*/TIFF
Compression mode: NONE/MEDIUM (G3)/HIGH
(G4)*
The default setting is indicated by an asterisk (*).
When you have completed the settings, touch the
[OK] key.
17
When you have finished programming the one-
touch key, touch the [EXIT] key.
If you wish to program another one-touch key,
touch the [NEXT] key.
NEXT EXIT
INITIAL S
ppd1@sharp.com
S
R(G4) OLOR
26
If you do not wish to
change the name, this
step is not necessary.
If you need to change
these settings,touch the
[FILE FORMAT] key.
If you do not need to
change the settings, this
step is not necessary.
Touching the [EXIT] key
returns you to the screen
of step 4 on page 25.