Sharp AR-C260 Network Scanner Operations page 32

STORING, EDITING, AND DELETING FROM THE TOUCH PANEL
STORING SENDER INFORMATION
Use this procedure to store the sender information (sender name and e-mail address) that is displayed when the
recipient receives your e-mail. Information for up to 20 different senders can be stored. Select a sender from the
stored senders using the touch panel of the machine when you send an image
appears in the sender column of the recipient's e-mail software program.
If you prefer to store sender information from the Web page, refer to
1 Press the [CUSTOM SETTINGS] key, and
then touch the [ADDRESS CONTROL] key
(refer to steps 1 and 2
2 Touch the [E-MAIL SENDER] key.
DIRECT ADDRESS
CUSTOM INDEX
E-MAIL SENDER
3 Touch the [STORE] key.
SENDER
STORE
EDITING AND DELETING SENDER INFORMATION
Use this procedure when you need to edit sender information or delete a sender.
Perform steps 1 and 2
1
SENDER INFORMATION".
2 Touch the [AMEND/DELETE] key.
AMEND/DELETE
3 Touch the one-touch key of the sender
that you wish to edit or delete.
LIST
1 GROUP
2 GROUP
on page 25).
of "STORING
The stored senders
O
appear.
The edition/deletion
screen of the touched
sender appears.
TABLE OF CONTENTS
(page
page 12.
4 Touch the [SENDER NAME] key.
SENDER NAME
RE.ADDRESS
5 Touch the [RE.ADDRESS] key.
SENDER NAME ÄÞ·-ÒÝÄ' 1 GROUP
RE.ADDRESS
6 If you have finished storing senders,
touch the [EXIT] key. If you wish to store
another sender, touch the [NEXT] key.
Edit or delete the sender.
4
E-MAIL SENDER
SENDER NAME ÄÞ·-ÒÝÄ'æ1 1 GROUP
RE.ADDRESS ppd1@sharp.com
Edit sender information in the same way that you
stored it. When finished, touch the [EXIT] key to
return to the screen of step 3.
To delete the sender, touch the [DELETE] key. A
message appears asking you to confirm your
selection. Touch the [YES] key to delete the
sender and return to the screen of step 3.
30
16). The selected sender
The "No." that automatically
appears is the lowest
number from 01 to 20 that
has not yet been
programmed. When
[SENDER NAME] is
touched, the letter-entry
screen appears. Enter up to
20 characters for the name.
The display changes to
the address entry screen
when you touch the
[RE.ADDRESS] key. Up
to 64 characters can be
entered for the sender's
e-mail address. When
finished, touch the [OK]
key to return to the
original screen.
DELETE EXIT