Selecting A Background Image; Power Save Mode Function - Sharp Notevision PG-C20XA Operation Manual

Selecting a
Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
AUTO SYNC
INPUT
BACK ENTER MENU
(GUI) On-screen Display

Power Save Mode Function

Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
INPUT AUTO SYNC
BACK ENTER MENU
(GUI) On-screen Display
35
Background
Remote control
2, 3, 4
2, 3
1, 5
Remote control
2, 3, 4
2, 3
1, 5
Image
This function allows you to select the image displayed
when no signal is being sent to the projector.
Description of Background Images
Blue
Blue screen
None Black screen
1 Press MENU.
2 Press ∂/ƒ to select "Options", and then press
ENTER.
3 Press ∂/ƒ to select "Background", and then
press ENTER.
4 Press ∂/ƒ to select "Blue" or "None".
5 To exit from the GUI, press MENU.
Function with toggle switch to control the quantity of
projected light. Select "ON" or "OFF" to decrease or
increase brightness, power consumption and fan noise.
Description of Power Save Modes
Quantity of light is 70%.
ON
Power consumption is 200 W.
Quantity of light is 100%.
OFF
Power consumption is 230 W.
1 Press MENU.
2 Press ∂/ƒ to select "Options", and then press
ENTER.
3 Press ∂/ƒ to select "Power Save Mode", and
then press ENTER.
4 Press ∂/ƒ to select "ON" or "OFF".
5 To exit from the GUI, press MENU.
• "Power Save Mode" is factory preset to "OFF" .
• When selecting "OFF" in "Power Save Mode", fan noise is
increased.
• Even when selecting "ON" in "Power Save Mode", fan noise
may increase if internal temperature rises enough to activate
the cooling function.