Connections; Connection To A Tv; Basic Tv Connection - Sharp DV-NC200X Operation Manual

Connection to a TV

CAUTION:
• Be sure to turn off the VCR/DVD and equipment to be connected before connecting.
• Read through the Operation Manual for the equipment to be connected.
• Be sure to keep the VCR/DVD connection cables separate from the TV antenna cable when you install the VCR/DVD, because it may cause
electrical interference when you are watching television programmes.
• DTS audio cannot be produced with an analogue connection.

Basic TV Connection

CAUTION:
• Connect the VCR/DVD directly to the TV. Do not connect the VCR/DVD to a VCR,
then connect the VCR to the TV. Copyright protection in the VCR could distort the
picture playing on the VCR/DVD.
• When the VCR/DVD is connected to a TV using both a Video cable and an S-Video cable, only the S-Video connection is enabled (the VIDEO
connection is disabled).
• You will not be able to hear all of the sound being output by the VCR/DVD if you use the Video/Audio cables (supplied) to a monaural TV that
has only one AUDIO input jack.
Hint
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• Connect the VCR/DVD directly to the TV. If you attempt to view video on a TV connected via a VCR, the copy protection function will
scramble the picture.
• If you want to listen to the audio through audio equipment, connect only the S-Video or Video cable to the TV.
.
Basic Audio
TV
Audio cable
(supplied)
VCR/DVD
or
(Analogue) AUDIO OUT
• The S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
If your TV is compatible with 525 or 625 progressive scanning and you want to enjoy that high quality picture;
You must select the connection Method 3 above and progressive scanning mode. To set the mode, set "PROGRESSIVE" to "ON" in the DISPLAY
menu so that "P.SCAN" will appear on the display of this VCR/DVD. (The progressive scanning is not available in the VCR mode.) See pages 29, 30
for more details.
If your TV is not compatible with progressive scanning;
Use this VCR/DVD in interlace mode. Make sure that no "P.SCAN" is on the display of this VCR/DVD. If so, set "PROGRESSIVE" to "OFF" in the DISPLAY
menu so that "P.SCAN" on the display of this VCR/DVD will disappear.
H9945AD_1.indd 10 H9945AD_1.indd 10
C
ONNECTIONS
Method 1 Method 2
Good picture Better picture
S-Video
Video
cable
cable
(commercially
(supplied)
available)
VIDEO OUT S-VIDEO OUT
– 10 –
This VCR/DVD
TV
VCR
Method 3
Best picture
Component Video
cable
(commercially
available)
COMPONENT VIDEO OUT
EN
5/11/2005 6:47:05 PM 5/11/2005 6:47:05 PM