About The Remote Control; Installing The Batteries For The Remote Control; Operable Range; Buttons For Dvd Only - Sharp DV-NC200X Operation Manual

Installing the Batteries for the Remote Control

Install two AA size (R-6) batteries (supplied) matching the polarity
indicated inside battery compartment of the remote control.
Hint
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.

Operable Range

Keep in mind the following when using the remote control:
• Make sure that there is no obstacle between
the remote control and the remote sensor on the VCR/DVD.
• The maximum operable range as follows;
Beeline: approximately 7 m (23 feet)
Either side of centre: approximately 5 m (16 feet) within 30 degrees
Above: approximately 5 m (16 feet) within 15 degrees
Below: approximately 3 m (10 feet) within 30 degrees

Buttons for DVD Only

Media type
Button
(Alphabetical order)
H9945AD_1.indd 8 H9945AD_1.indd 8
A R
BOUT THE EMOTE
• Repeats playback of a selected section.
• Press to change the camera angle to see the
sequence being played back from a different
angle (DVD-Video).
• Press to search chapter, title or time.
• Press to select DVD output mode and to use
the remote control in DVD mode.
• Press to accept a setting.
• Press to adjust the black parts of the picture
brighter.
• Press to call back the Marker display.
• Activates Virtual Surround or Rapid Play.
• Repeats playback of the current disc, title or
chapter.
• Returns to the previous operation.
• Press to enter the setup mode or to change
setup items.
• Press to skip chapters or titles.
• Press to select a desired subtitle language.
• Displays the title menu.
• Enlarges part of a DVD-reproduced image.
– 8 –
C
ONTROL
DV-NC200
OPERATE OPEN/CLOSE
PULL OPEN STOP/ OUTPUT
REW FF EJECT PLAY REC CH VCR DVD STOP PLAY
TIMER
(TRACKING)
DVD mode
• Repeats playback of a selected section (VCD, CD).
• Press to search track.
• Press to search time (VCD, CD).
• Press to select DVD output mode and to use the
remote control in DVD mode.
• Press to accept a setting.
• Press to adjust the black parts of the picture
britghter (VCD).
• Press to call back the Marker display (VCD, CD).
• Activates programmed playback, random play-
back or folder playback mode (CD, MP3, JPEG).
• Activates the 3D sound (VCD, CD) .
• Repeats playback of the current disc, group or
track.
• Returns to the previous operation.
• Press to enter the setup mode or to change
setup items.
• Press to skip tracks.
• Press to return to the first hierarchy in the
programme and file list when the file list is the
second hierarchy or deeper (MP3, JPEG).
• Enlarges part of a reproduced image (VCD, JPEG).
—
—
EN
5/11/2005 6:46:59 PM 5/11/2005 6:46:59 PM