Table of Contents
Advertisement
Connection to a TV
CAUTION:
• Be sure to turn off the VCR/DVD and equipment to be connected before connecting.
• Read through the Operation Manual for the equipment to be connected.
• Be sure to keep the VCR/DVD connection cables separate from the TV antenna cable when you install the VCR/DVD, because it may cause
electrical interference when you are watching television programmes.
Basic TV connection
CAUTION:
• Connect the VCR/DVD directly to the TV. Do not connect the VCR/DVD to a VCR,
then connect the VCR to the TV. Copyright protection in the VCR could distort the
picture playing on the VCR/DVD.
Hint
• Playback picture from DVD and VCR cannot be delivered through the Round Coaxial cable.
The Round Coaxial cable is only for sending the antenna signal to the TV.
• Connect the VCR/DVD directly to the TV.
If you attempt to view video on a TV connected via a VCR, the copy protection function will scramble the picture.
VCR and Basic DVD Connection
TV
(commercially
VCR/DVD
ANALOG AUDIO OUT
Hint
• The VCR/DVD is sending each video signals simultaneously. If you connected an S-VIDEO OUT and/or a COMPONENT VIDEO OUT with the
VIDEO OUT (SCART), make sure your TV's input mode is set correctly according to the connection you made.
• You will not be able to hear all of the sound being output by the VCR/DVD if you use the Audio cables (commercially available) to a monau-
ral TV that has only one audio input jack.
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• If you want to listen to the audio through audio equipment, connect only the S-video or component video cable to the TV.
• The S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
• If your TV is compatible with 525 or 625 progressive scanning and you want to enjoy that high quality picture, you must connect the com-
ponent video cable to your TV's component video input jacks (Y/P
OUT" to "COMPONENT PROGRESSIVE (Component (P))" in the DISPLAY menu so that "P.SCAN" will appear on the display of this VCR/DVD. (The
progressive scanning is not available in the VCR mode.) See pages 29, 30 for more details.
• If your TV is not compatible with progressive scanning, use this VCR/DVD in interlace mode. Make sure that no "P.SCAN" is on the display of
this VCR/DVD. If so, set "VIDEO OUT" to "COMPONENT INTERLACE (Component (I))" in the DISPLAY menu so that "P.SCAN" on the display of this
VCR/DVD will disappear.
• ANALOG AUDIO OUT jacks and scart terminal are not available on the DTS audio.
Downloaded from:
http://www.usersmanualguide.com/
Audio cable
available)
VIDEO OUT
C
ONNECTIONS
AERIAL
from
Antenna
RF OUT
To EURO AV1 (TV)
terminal
Scart cable
(Commercially available)
Basic
AV1
Scart cable
(commercially
available)
/P
) and select progressive scanning mode. To set the mode, set "VIDEO
R
B
– 10 –
To AERIAL
To RF OUT
jack
jack
Round Coaxial cable
(supplied)
To SCART
terminal
TV
Available on DVD only
DVD's Picture Quality
Good
S-VIDEO IN
S-video
cable
Component
(commercially
video cable
available)
(commercially
available)
S-VIDEO OUT
or
T V
This VCR/DVD
VCR
Best
COMPONENT
VIDEO IN
Y
Y
C
P
B
B
or
C
P
R
R
COMPONENT
VIDEO OUT
EN
Advertisement
Table of Contents
