Marker Setup; Repeat / Random / Programmed Playback; Repeat Playback - Sharp DV-NC200X Operation Manual

VCR DVD
press first.
1 2 3
4 5 6
7 8 9
0 +10
PLAY
STOP
VCR/DVD COMBINATION
NA527AD
This feature allows you to assign a specific point on a disc to be called
back later.
To set a marker
1.
2.
or
3.
To return to the marker later
1.

Repeat Playback

VCR DVD
press first.
1 2 3
4 5 6
7 8 9
0 +10
PLAY
STOP
VCR/DVD COMBINATION NA527AD
Repeat function is available only during playback.
1.
Each time you press REPEAT, repeat function changes as examples
below.
OFF
(repeat off)
CHAPTER (current chapter repeat)
TITLE (current title repeat)
(repeat off)
OFF
(current chapter repeat)
CHAPTER
(current title repeat)
TITLE
(entire disc repeat)
ALL
H9945AD_2.indd 26 H9945AD_2.indd 26
M
ARKER
R / R
EPEAT ANDOM
S
ETUP
2.
or
3.
At the desired marker
• Playback will restart from the specific point which you set.
To exit the Marker display
1.
Hint
• The Marker display will disappear in about 30 seconds when there
is no input.
• To clear a marker, select the marker to be cleared at step
section "To set a marker" or "To return to the marker later", and
then press CLEAR/C-RESET.
• Opening the disc tray or turning off the power will erase all mark-
ers.
• Selecting "AC" at step
return to the marker later" will also erase all markers.
• You can mark up to 10 points.
/ P P
ROGRAMMED LAYBACK
(repeat off)
OFF
(current track repeat)
TRACK
(entire disc repeat)
ALL
(repeat off)
OFF
(current track repeat)
TRACK
(current group repeat)
GROUP
(entire disc repeat)
ALL
Hint
• Repeat setting will be cleared when moving to another title, chap-
ter or track.
• Repeat playback may not function with some discs or during
Repeat A-B Playback.
– 26 –
2 in the section "To set a marker" or "To
5/11/2005 7:12:43 PM 5/11/2005 7:12:43 PM
2 in the
EN